※The image shows the loader equipped machine.
Higher accuracy and shorter cycles for increased productivityA 4-inch built-in motor equipped spindle is installed as a standard feature to achieve higher accuracy and shorter spindle acceleration/deceleration time. (Compared to the previous model: spindle acceleration/deceleration time reduction of up to 40%)
User friendly machine designTool holders are located within easy reach (spindle center height: 950 mm) with a fully opening door above the holder location for improved usability. The slide stroke is extended to ensure the degree of freedom in tooling. (Compared to the previous model: X-axis 25%, Z-axis 56% extended)
Easy-to-use operation panelThe operation panel can slide The touch-panel type operation panel (MITSUBISHI new NC: M80) is employed, enabling intuitive operations by minimizing the buttons displayed for each process. Touch gestures as like a tablet PC are supported to reduce the number of operations and heighten work efficiency. An auto backup function for cutting programs is installed and in case of trouble, data can be saved to SD card, USB memory device, or either NC memory as selected.
Ultra compact design suitable for production line formation in a limited spaceThe machine width is only 780 mm, which makes the loader transfer distance short and therefore the line width short, contributing to the reduction of installation space and cycle time. (Machine width without loader: 1,310 mm)
|Chuck size||Collet, 4||inch|
|Spindle bearing I.D.||φ65||mm|
|Spindle speed||Max. 8,000||min-1|
|Rapid traverse rate||X:18 Z:18||m/min|
|Spindle motor||AC7.5 / 5.5 / 3.7||kW|
|L × W||1,506×1,250 (780×1,735)||mm|
|Controller||TAKAMAZ & FANUC|