Variety of milling workThe first turret is equipped with Y-Axis functions, standard. It has a ±40mm range of motion, and achieves highly demanding high-precision milling work through superior linearity.
Capable of turning large-diameter bar materialThe maximum bar work diameter is φ51mm, standard, and an 8-inch chuck can be mounted on both spindles. In addition, for the first spindle only, it is possible to modify the spindle to handle bar work diameters up toφ65mm. Along with increased spindle diameter, the spindle motor power is also increased. An AC18.5/15kW motor is mounted for the first spindle while an AC11/7.5kW motor for the second spindle is mounted, making it possible to perform at even higher level of compound machining, and then some.
|Main spindle||Sub spindle|
|Spindle bearing I.D.||φ100 (φ120 Opt.)||φ100||mm|
|Spindle speed||Max. 4,000||min-1|
|Max.stroke||X:175 Z:510 Y:±40||X:175 Z:510 A:570||mm|
|Rapid traverse rate||X:18 Z:24 Y:12||X:18 Z:24 A:30||m/min|
|Spindle motor||AC18.5 / 15||AC11 / 7.5||kW|
|L × W||3,050 × 2,125||mm|
|Controller||TAKAMAZ & FANUC|