Product List


Improved capability suited to bar work
A higher motor output power in addition to a larger main spindle through-hole diameter increases the cutting capacity, allowing heavy-duty cutting of large-diameter bar materials. (Maximum bar diameter for main spindle: φ51 mm, motor output: 18 . 5 / 15 / 11 k W, 13% reduction in spindle acceleration/deceleration time and 50% increase in material removal compared to existing machines)Higher level of freedom for tooling
Up to 48 turning tools and 24 power tools can be mounted with a turret half-indexing mechanism. In addition, a bolt mount system (BMT45), the new global standard, is adopted. A wide range of tooling variations realizes machining suitable for your production style.Easier maintenance and setup for multi-variety, small-quantity production
The machine body equipped with a slant slide at an angle of 60 ° enables efficient chip discharge, thereby preventing chip accumulation and increasing the ease of maintenance. Furthermore, the accessibility of the area between the spindles from the front of the machine is improved, helping to lighten setup work.Item | Ability | Unit | |
---|---|---|---|
Main spindle | Sub spindle | ||
Chuck size | Collet, 6 | inch | |
Spindle bearing I.D. | φ100 | φ85 | mm |
Spindle speed | Max. 5,000 | min-1 | |
Type | 12-station turret, 24ST | ||
Max.stroke | X1:162.5 Z1:500 Y:±35 X2:170 Z2:500 A:550 | mm | |
Rapid traverse rate | X1:18 Z1:30 Y:12 X2:18 Z2:30 A:30 | m/min | |
Spindle motor | AC18.5 / 15 / 11 | AC9 / 7.5 / 5.5 | kW |
L × W | 2,995 × 2,250 | mm | |
Controller | TAKAMAZ & FANUC 32i-B |