Loader cycle that will disprove common knowledge in loading technology
This new 3-axis loader is even faster with a loading time of 6 sec.This machine is equipped with high speed shutter,reducing shutter open/close time into half(with open/close <0.5 sec).Aminimum 18 sec cycle time (OP1-2)is achieved with this new loader cycle idea.
Pursuit of both cutting capability and precision
The adoption of the box sliding for the slide,φ100mm maximum spindle diameter and 11/7.5kW moter.Installation of the spindle base cooling system for stable machining precision.
Lower center of gravity・Space-saving design
A compact 1,890mm width machine design ensuring a 150mm X-axis and 160mm Z-axis slide stroke with a 1,000mm spindle center height.Easy acces to the spindle chuck and work turn device and easy change-over.
|Chuck size||Collet, 8 × 2||inch|
|Spindle||Spindle bearing I.D.||φ100||mm|
|Spindle speed||Max. 4,000||min-1|
|Tool post||Type||8-station turret × 2|
|Rapid traverse rate||X:24
|Speendle motor||AC11 / 7.5 ×2||kW|
|L × W||1,890 (2,250※) × 2,140||mm|
|Controller||TAKAMAZ & FANUC 0i-TD|
|Workpiece diameter (Reference)||φ150||mm|
|Workpiece length (Reference)||50||mm|
|Max. load capacity||3.0||kg|
|Rapid traverse rate||X:35 Y:125 Z:170||m/min|
Awards in the 2014
◆Recipient of the Examination Committee Special Award at the 44th Machine Industry Design Awards◆
The Takamaz product XW-130 was awarded the Examination Committee Special Award at the 2014 Machine Industry Design Awards held by Nikkan Kogyo Shimbun.