Supports a wide range of workpiece layouts
Responding to needs toward existing machines, a large through-hole spindle specification (φ120) has been added as an option. By enlarging the through-hole, handling of large-diameter bar material is supported.
High power tool performance (BMT turret)
The milling unit with a motor output of AC 5.5/3.7/2.2 kW and a maximum tool size of φ20 mm improves productivity.
The turret uses the bolt mount system (BMT55), which can shorten the setup time. In addition, the turret half-indexing mechanism allows up to 24 tools to be mounted, also reducing set-up time (up to 12 power tools can be mounted).
New model can be installed
To improve user-friendliness, both the machine and automation equipment are controlled centrally through FANUC operations.
We provide an automation system offering peace of mind and reliability, including more efficient set-up work with the handle retrace function.
TAKAMAZ operating system adopted (F loader specifications)
In addition to the conventional FANUC screen, functions optimal for automated machines are featured. A support function is added to enable safe and easy manual cutting work for tool alignment, and also there is the traceability function that automatically saves the operating status to assist with preventive maintenance.
Cleaning function (patent pending) improves the operation rate
Coolant discharge ports are fitted as standard in the machining chamber: at the top of the turret section and in the door opening. This reduces the frequency of cleaning and improves the operation rate.
||Spindle bearing I.D.
||φ100 (φ120 Opt.)
||Max. 3,500 (5,000・3,000 Opt.)
|Rapid traverse rate
||Tool storage capacity
||AC11/7.5:φ100 3,500min -1
(AC15/11:φ100 5,000min -1 Opt.)
(AC15/11:φ120 3,000min -1 Opt.)
|L × W
||TAKAMAZ & FANUC 0i-TF Plus
|Optimum workpiece diameter
|Optimum workpiece length
|Max. load capacity
|Rapid traverse rate
※The length depends on the workpiece diameter. If the workpiece weighs more than the above, it cannot be loaded, even within the size range described.
※1.With the FGH loader specification, the NC unit is installed with a touch-panel screen and Windows PC.
※2.Can be installed only with the φ100 spindle specification.