Cutting capacity up by 180%
With a large diameter spindle of 120mm combined with an 18.5/15kW motor, cutting capacity is 1.8 times than that of our previous models. The machine is capable of heavy cutting with high torque even at low speeds needed for cutting of large-diameter flange-like work.
Reassuring stability for mass production
A spindle cooling mechanism is built into the unit to minimize geometric change due from heat. An optional thermal displacement system is available. Dimensional accuracy and stability can be attained by combining the spindle cooler with the thermal displacement system.
| Item |
Ability |
Unit |
| Chuck size |
Collet, 10×2 |
inch |
| Spindle |
Spindle bearing I.D. |
φ120 |
mm |
| Spindle speed |
Max. 2,800 |
min-1 |
| Tool post |
Type |
8-station turret × 2 |
|
| Max.stroke |
X:170
Z:220 |
mm |
| Rapid traverse rate |
X:24
Z:24 |
m/min |
| Speendle motor |
AC18.5 / 15 ×2 |
kW |
| W × L |
1,990 (2,350 ※) × 2,330 |
mm |
| Controller |
TAKAMAZ & FANUC 0i-TF |
|
※Machine width with loader spec.
| Item【Loader specifications】 |
Ability |
Unit |
| ΣiGTH200 |
| Workpiece diameter (Reference) |
φ200 |
mm |
| Workpiece length (Reference) |
120 |
mm |
| Max. load capacity |
8.0 |
kg |
| Rapid traverse rate |
X:30 Y:80 Z:100 |
m/min |
※The length depends on the workpiece diameter. If the workpiece weighs more than the above, it cannot be loaded, even within the size range described.
