Surprisingly compact thanks to incorporation of a 4-inch, gang type, built-in motor spindle!! A machine with advanced functions spec ialized in small part production makes its debut.
J-Wave Plus with special front loading system
Item | Ability | Unit | |
---|---|---|---|
Chuck size | Collet, 4 | inch | |
Spindle | Spindle bearing I.D. | φ65 | mm |
Spindle speed | Max. 4,500 | min-1 | |
Tool post | Type | Gang type | |
Max.stroke | X:200 Z:250 |
mm | |
Rapid traverse rate | X:18 Z:18 |
m/min | |
Spindle motor | AC5.5 / 3.7 | kW | |
W × L | 1,506 × 1,250 | mm | |
Controller | TAKAMAZ & MITSUBISHI M80 |
Item【Loader specifications】 | Ability | Unit |
---|---|---|
WA30 | ||
Workpiece diameter (Reference) | φ30 | mm |
Workpiece length (Reference) | 50 | mm |
Max. load capacity | 0.3 | kg |
Rapid traverse rate | Z:75 | m/min |
※The length depends on the workpiece diameter. If the workpiece weighs more than the above, it cannot be loaded, even within the size range described.
Please feel free to contact us if you have any questions or comments, or would like catalogs.