|
XD-8 PLUS |
 |
|
XD-8t PLUS |
|
Select either a linear or drum turret according to requirements ! |
| |
|
Use of a linear turret substantially reduces idle time |
 |
| |
To answer the requirements imposed by severe operation time restrictions, the machine is equipped with a linear turret that doesn't need to be indexed.
ฆThe XD-8 can also be equipped with a 6-station drum turret. |
| |
|
|
Eco- friendly specifications for a cleaner production environment |
|
The high performance ball screws and linear guides with a self-lubricating function that are featured on the XD-8.
Apart from making the conventional daily oil check unnecessary, this function has the additional advantages that it stops lubricating oil contaminating and degrading coolant, substantially cuts the time required for maintenance, and keeps the working environment cleaner. |
| |
| "Power regeneration method" applied for energy savings |
 |
| |
A machine like this goes through a great deal of spindle acceleration/deceleraion and repeated turret motions in both directions, so the reverse electromotive force generated during motor deceleration is not consumed by conversion to heat as in previous machine models. Instead there is a power recycling system whereby the generated energy is circulated back to the power supply, giving durability in continuous operation, and energy savings. |
| |
|
| Compact design with integral loder for higt-efficiency operation. |
| |
Machine design with loader system as a unit by fully utilizing the upper space of the lathe machine. Extra space aroung the machines is no longer necessary to be wasted, to utilize the maximum of space.
Swiching to servomotor drive rather than the air cylinder drive normally used in loaders reduces running costs due to the smaller number of consumable parts.
|
| |
| Item |
Unit |
XD-8PLUS |
XD-8tPLUS |
Loader transfer capacity |
| Chuck size |
inch |
ColletA5(Opt.)×2 |
|
Unit |
MD-50 |
| Optimum turning diameter |
mm |
ำ50 |
Correspondence models |
|
XD-8
PLUS |
| Spindle bearing I.D. |
min-1 |
φ65 |
Workpiece dimension (Max.) |
mm |
φ50×60 |
| Spindle speed |
|
Max.4,500(ฆ8,000 Opt.) |
| Type
|
|
Horizontal linear |
6-station turret |
| Max. Stroke |
mm |
X:200@Z:380(±190) |
X:140@Z:380(±190) |
Maximum bearable mass (one side) |
kg |
0.5 |
| Rapid traverse rate |
m/min |
X:18@Z:24 |
| Spindle motor |
kW |
AC3.7/2.2(ฆ5.5/3.7 Opt.)×2 |
Rapid traverse rate |
Traverse axis |
m/min |
75 |
| L~W~H |
mm |
1,580×1,550 |
| Total electric capacity |
kg |
3,200 |
3,300 |
Vertical axis |
m/min |
75 |
| Controller |
|
TAKAMAZ&FANUC |
|
| |
|
|