高松機械工業株式会社

TAKAMAZ 50th Anniversary
English
製品情報製品詳細オレンジライン
XW-80M
XW-80M

Corresponds to every type of production

Diverse process requirements including simultaneous machining of the same process, of both surfaces, and of di?erent processes, can be handled by one machine. Multi-process machining for mass production such as drilling and tapping can also be achieved with power tools and the Cs-Axis. (Power tool available on XW-80M)


Stable precision machining

The Z-Axis slide base and the bed support of this machine are combined resulting to a higher rigid design. The slide is equipped with high rigid roller guide for good tracking, capable of sliding more smoothly as it is controlled by a new CNC. These improvements are aimed at improving machine accuracy. By conducting a thorough analysis of thermal displacement, a symmetric bed structure has been introduced. A cooling unit has been installed as standard to restrict relative displacement due to temperature change during machining and maintain stable dimensional accuracy.


Improved Operating Ratio per Unit Area

Two-spindle simultaneous machining reduces the cycle time by half. The machine is compactly designed with the length of 1,720mm and the ?oor space as small as 3.1m2.

Item Unit  
Chuck size inch 6×2
Spindle bearing I.D mm φ75
Spindle speed min-1 Max.4,500(6,000Opt.)
Tool post Type   8-station turret×2
Tool post Max.stroke mm X:120 Z:160
Tool post Rapid traverse rate m/min X:18 Z:18
Spindle motor kW AC5.5/3.7(7.5/5.5Opt.)×2
L×W mm 2,140×1,825
Controller   TAKAMAZ & FANUC