A Manual Machine that Prioritizes Ease of OperationIn order to reduce operator workload as much as possible, the front door opening is increased. Moreover, the machining area is wider making it an environmentally friendly design work. The bed is a slant structure to stimulate the natural fall of the chips. Cutting oil tank is segregated from the rear of the machine slide, making it easier to clean the tank regularly.
Built in 8-inch Chuck + 8-station TurretThe spindle unit of this machine has adopted the same structure of our previous model (X-150PLUS) that has a rigid durable and proven bearing bore diameter of φ100. In addition □25mm size toolholder can be directly mounted on the eight station turret for for more powerful machining process.
Pursuit of Cost PerformanceWithout sacriﬁcing functionality, greatly strived for a model that is designed with signiﬁcantly fewer parts than conventional models, and succeeded in approximately 30% parts reduction. As an example, the maintenance friendly cover with large opening is improved through reduced assembly and production cost and conscious cost reduction of parts and on each process by integrated structure.
|Spindle bearing I.D.||φ100||mm|
|Spindle speed||Max. 3,500||min-1|
|Rapid traverse rate||X:12
|Speendle motor||AC7.5 / 5.5||kW|
|L × W||1,600 × 1,460||mm|
|Controller||TAKAMAZ & FANUC|