Machine equipped with a sub-spindle as standard for turning complete cut workpiecesThe X-120 can be equipped with a loader or with a barfeeder making it capable of complete turning of flange and shaft type workpieces at mass production level. As standard, a sub-spindle( 5 inch, AC3.7/2.2kW) is installed making it capable of high precision dual face turning by workpiece direct chucking.
Space-saving designFor manufacturing facilities located in high priced regions, improving the operation per unit area is indispensable. The X-120 provides a wide cutting range with maximum turning length of 300mm. This machine also features a space saving design with main body length of 1,680mm and maximum length of 2,000mm. The slide is inclined at 30-degrees making it suitable for efficient chip disposal. This prevents chip accumulation problems.
Automation System"Reliable Automation System" is the theme that TAKAMAZ emphasizes to meet global needs. TAKAMAZ takes pride of the "ΣGH loader" that can be installed on the X-120. This gantry type servo loader has high speed of top level in Japan today. The servo driven hard of the loader can adapt to any motions of loading and unloading. In combination with a barfeeder , a parts catcher, and out conveyor, the X-120 can meet bar workpiece turning.
|Item||Main spindle||Sub spindle||Unit|
|Spindle bearing I.D.||φ75||φ65||mm|
|Spindle speed||Max. 4,500（6,000 opt）||min-1|
|Rapid traverse rate||X:18 Z:24 A:18||m/min|
|Spindle motor||AC5.5/3.7(7.5/5.5 opt)||AC3.7/2.2||kW|
|L × W||2,000 × 1,630||mm|
|Controller||TAKAMAZ & FANUC|