Achieve Space-Saving Comparable to 6-inch ClassThe machine width is 1,250mm. The ﬂoor space is 1.85m2 , about 23% less than previous model, making it the smallest machine with an 8-inch chuck among the same class in the industry. In our products, the space needed for  x [Set of Previous Model & Stocker] is enough for  x [Set of XC-150 & Stocker]. Arrangement of lines requiring only small spaces is possible leading to increased eﬃciency in operation and improvement in manufacturing.
Adoption of Rigid SlideJust like the other models, the Z-Axis slide applies square box-way slide that is known for rigidity. The X-Axis is designed for increased rigidity than previous model that can be used for heavy cutting.
Energy Saving MachineAs compared with previous models, there are 20% reduction on the spindle inertia and 36% reduction on the spindle acceleration and deceleration time (0-3,500min-1). In addition, X-Axis and Z-Axis have also reduction on the motor load inertia of approximately 8%. Per FEM Analysis for optimizing the design of castings by eliminating unnecessary materials, as compared to previous models, there is a 20% reduction of materials used. This is good for the environment. Through these measures, the power consumption without compromising machine functions and processing performance is reduced by 10%.
|Spindle bearing I.D.||φ100||mm|
|Spindle speed||Max. 3,500||min-1|
|Rapid traverse rate||X:18
|Speendle motor||AC 11 / 7.5||kW|
|L × W||1,250 × 1,480||mm|
|Controller||TAKAMAZ & FANUC|