高松機械工業株式会社

TAKAMAZ 50th Anniversary
English
製品情報 製品詳細 オレンジライン
XD-8PLUS
XD-8PLUS

Use of a linear turret substantially reduces idle time

To answer the requirements imposed by severe operation time restrictions, the machine is equipped with a linear turret that doesn't need to be indexed. The machine has also been given a simpler construction, which improves its rigidity and so allows more accurate machining.


Newly developed high-speed air-driven precision chucking system

To answer requirements for faster cutting, a highly rigid spindle construction with a φ65mm bearing internal bore and maximum speed of 8,000min-1 (Option) is adopted. In the standard specification, a pull-type collet chuck made by TAKAMAZ is fitted. However, chucks such as the T850 type outward-opening chuck that has been used previously can also be used, or alternatively a 5-inch power chuck could be fitted. ※Power chucks can be used with XD-8PLUS/XD-8TPLUS only


Integral tool holders for simple setup (XD-8 PLUS: linear turret)

Integral tool holders has been adopted to improve rigidity, speed up setup changes, and save space. Due to the integral construction, chips are no longer trapped against the holder, and accidents that result from the trapping of chips are also prevented


ability
Item XD-8 PLUS XD-8T PLUS Unit
Chuck size 5 × 2 inch
Spindle bearing I.D. φ65 mm
Spindle speed Max. 4,500(8,000 opt) min-1
Type Horizontal linear 6-station turret  
Max.stroke X:200 z:380 X:140 Z:380 mm
Rapid traverse rate X:18 Z:24 m/min
Spindle motor AC3.7/2.2 kW
L × W 1,580 × 1,550 mm
Controller TAKAMAZ & FANUC