"Space saving" machine for better visibility in the factoryKeeping the basic structure of USL®-480, features of two machines are incorporated into a single 1000mm width bed. Compared with two-machine-in-line, the required ﬂoor space is reduced by about 27%. In addition, the 1500mm height of the machine provides better visibility in the factory by eliminating high-rise wall that might obstruct view. Installation at factory with lower ceiling is suitable, which relates to the beneﬁt of reducing hidden cost such as air conditioning and operators' time moving on the ﬂoor.
Huge Energy-Saving EﬀectBesides a compact design for space savings, TAKAMAZ put eﬀort to maintain a minimal use of resources. With 1 bed, 1 controller, 1 loader, and 1 chip conveyor compactly designed together, the number of components is signiﬁcantly reduced producing a lighter machine while maintaining rigidity. If you compare the power consumption with that of 2 "USL-480" machines, the power consumption of this machine is lower by about 44% during standby, and by about 31% during operation.
Higher performance control systemThe newest Mitsubishi controller is installed. Conventional optional NC features are incorporated as standard features, achieving high performance control system. In addition, a touch panel monitor provides compact and improved accessibility of operation box.
|Chuck size||3 × 2||inch|
|Spindle bearing I.D.||φ50||mm|
|Spindle speed||Max. 10,000※||min-1|
|Type||Horizontal linear × 2|
|Rapid traverse rate||X:12
|Speendle motor||AC3.7 / 2.2 × 2||kW|
|L × W||1,300 × 2,000||mm|
|Controller||TAKAMAZ & FANUC|
※Some restrictions may apply depending on the chucking cylinder type.